Organized

DIY: Chic Fabric Covered Magnetic Board

Wednesday, March 25th, 2009

Sneak Peek of Final Product:

magnetic board corner final

There are many ways to cover a corkboard with fabric – this I have done, but I was curious about making a fabric covered magnetic board, so I started poking around online.  In doing my research, I saw that there were not a lot of fabric covered magnetic boards out there, but I did find some where the crafty creator is actually cutting steel for inside of a frame. Perhaps I am lazy, or just a bit chicken when it comes to cutting metal, but I just wanted to cover a magnetic board that I found at the local office supply store. 

Supplies:

  1. 18” x 24” magnetic dry erase board from office supply store
  2. Heavy duty nickel sized magnets from hardware store (not from office supply, those are too weak)
  3. 5/8 yard of cotton fabric of choice (the thinner the better, but not transparent)
  4. Decorative brads (or shells, or glass rocks, or whatever you choose to glue to your magnets.)
  5. Decorative ribbon for “frame” and for optional hanging. 
  6. Hot glue gun

supplies

Start by ironing your cotton fabric to remove any creases.  Then lay your magnetic board on top of the fabric.

lay flat

Begin gluing the fabric to the top of the magnetic board.  (Note: This is easier to do if your fabric has some sort of pattern or stripe that you can follow to align the fabric as you glue.)  Then glue the bottom, and then glue the sides.  Go slowly, because you don’t want any puckering and you want your fabric pattern to be straight. 

glue fabric

My magnetic board came with tiny brackets for hanging on the wall, so I cut into the fabric where I wanted the bracket (16” apart is the width of most wall studs).  Then I glued around the bracket to solidify the fabric edging, and to secure the bracket in place. 

cut into fabric glue bracket

While your glue on the board dries, take your magnets and hot glue the brads on top of the magnets.  [Note: these magnets are powerful, and dangerous around small children, so I would not do this project around, or for, anyone under the age of 5]. 

magnets

glue brad

Allow your new magnets to dry, and turn back to the ribbon “frame” on your magnetic board.  Lay out your ribbon, and glue it slowly, while you trim up the corners.  Apply glue underneath all of the ribbon and let dry. 

ribbon glue

ribbon corner

Optional:  If you do not want to use the brackets to hang your board, you can add a ribbon trim, like pictured below.   Make sure you use a lot of glue to secure the bow in place.  [Pretend the glue is collagen, and the bow is Meg Ryan’s lips and pump away !  Sorry Meg, I still love ya.]    

bow glued 

So here’s how it looks when it’s complete.  Total time is about 90 minutes. 

final magnet board

Idea Gallery:

Gal’s Office: Do a larger version of this with a dramatic patterned fabric and elegant ribbon, and use antique buttons or scrapbook “jewels” for the magnets. 

Guy’s Office:  Cover the board in slate gray, and make magnets out of polished rocks.  Or would he prefer beer bottle caps?  :-)

Boy’s Room:  For a pirate theme, find a fabric with a map pattern, and make magnets with gold coins.  If your boy loves cars, make a “racetrack” on the board  with gray or black ribbon, and find miniature cars for his magnets.  Zoom zoom.

Beach Style:  Find a cotton linen fabric, then make magnets with shells or sea glass. 

Kitchen:  Find a fabric that compliments your kitchen, then make magnets out of miniature food items found at your local craft store,  or from anything metallic that matches your hardware.

Mudroom/Home Organization Center:  Anything goes.

If you do this project, send me your photos and I will post them !

Oh, and check out these different style handmade magnetic boards on Etsy. These are very chic.  Also, look at Little Birdie Secrets version of a magnetic board.  And also her separate post on fabric covered button magnets.  Love them!

Google BookmarksBookmark/FavoritesStumbleUponShare

HOMEmade: Letter Hooks

Saturday, February 21st, 2009
We all love alphabet letters, hanging in the house, spelling out whimsical or inspirational words, or perhaps just your child’s name on the wall. I prefer a letter that multi-tasks, like these do:



There’s just one teensy problem. While they look nice on the wall, they are practical only if secured into a wall stud. Well, wall studs are typically 16″ apart, or sometimes, just randomly spaced (if you own an older home). How to make a statement and actually put it to use? Secure the chosen letters to a wood background.

Here’s what I did. I had a piece of smooth scrap wood left over from the remodel. I spray painted it green, let it dry, then I had Mr. CG screw the letters to the wood. Then Mr. CG secured the wood directly to the wall studs. Ta-dah! Instant organization and charm for my mud room. Here’s mine:

Here are some other alphabet wall hooks available online:

From Anthropologie:

For $16 For $8

For $12

From Sundance for $10:

From JCPenney, on clearance for $5:

From Antique Hardware & Home, on sale for $3.19 each

Google BookmarksBookmark/FavoritesStumbleUponShare