DIY: Chic Fabric Covered Magnetic Board

March 25, 2009

Sneak Peek of Final Product:

magnetic board corner final

There are many ways to cover a corkboard with fabric – this I have done, but I was curious about making a fabric covered magnetic board, so I started poking around online.  In doing my research, I saw that there were not a lot of fabric covered magnetic boards out there, but I did find some where the crafty creator is actually cutting steel for inside of a frame. Perhaps I am lazy, or just a bit chicken when it comes to cutting metal, but I just wanted to cover a magnetic board that I found at the local office supply store. 

Supplies:

  1. 18” x 24” magnetic dry erase board from office supply store
  2. Heavy duty nickel sized magnets from hardware store (not from office supply, those are too weak)
  3. 5/8 yard of cotton fabric of choice (the thinner the better, but not transparent)
  4. Decorative brads (or shells, or glass rocks, or whatever you choose to glue to your magnets.)
  5. Decorative ribbon for “frame” and for optional hanging. 
  6. Hot glue gun

supplies

Start by ironing your cotton fabric to remove any creases.  Then lay your magnetic board on top of the fabric.

lay flat

Begin gluing the fabric to the top of the magnetic board.  (Note: This is easier to do if your fabric has some sort of pattern or stripe that you can follow to align the fabric as you glue.)  Then glue the bottom, and then glue the sides.  Go slowly, because you don’t want any puckering and you want your fabric pattern to be straight. 

glue fabric

My magnetic board came with tiny brackets for hanging on the wall, so I cut into the fabric where I wanted the bracket (16” apart is the width of most wall studs).  Then I glued around the bracket to solidify the fabric edging, and to secure the bracket in place. 

cut into fabric glue bracket

While your glue on the board dries, take your magnets and hot glue the brads on top of the magnets.  [Note: these magnets are powerful, and dangerous around small children, so I would not do this project around, or for, anyone under the age of 5]. 

magnets

glue brad

Allow your new magnets to dry, and turn back to the ribbon “frame” on your magnetic board.  Lay out your ribbon, and glue it slowly, while you trim up the corners.  Apply glue underneath all of the ribbon and let dry. 

ribbon glue

ribbon corner

Optional:  If you do not want to use the brackets to hang your board, you can add a ribbon trim, like pictured below.   Make sure you use a lot of glue to secure the bow in place.  [Pretend the glue is collagen, and the bow is Meg Ryan’s lips and pump away !  Sorry Meg, I still love ya.]    

bow glued 

So here’s how it looks when it’s complete.  Total time is about 90 minutes. 

final magnet board

Idea Gallery:

Gal’s Office: Do a larger version of this with a dramatic patterned fabric and elegant ribbon, and use antique buttons or scrapbook “jewels” for the magnets. 

Guy’s Office:  Cover the board in slate gray, and make magnets out of polished rocks.  Or would he prefer beer bottle caps?  :-)

Boy’s Room:  For a pirate theme, find a fabric with a map pattern, and make magnets with gold coins.  If your boy loves cars, make a “racetrack” on the board  with gray or black ribbon, and find miniature cars for his magnets.  Zoom zoom.

Beach Style:  Find a cotton linen fabric, then make magnets with shells or sea glass. 

Kitchen:  Find a fabric that compliments your kitchen, then make magnets out of miniature food items found at your local craft store,  or from anything metallic that matches your hardware.

Mudroom/Home Organization Center:  Anything goes.

If you do this project, send me your photos and I will post them !

Oh, and check out these different style handmade magnetic boards on Etsy. These are very chic.  Also, look at Little Birdie Secrets version of a magnetic board.  And also her separate post on fabric covered button magnets.  Love them!

Tags: ,

8 Responses to “DIY: Chic Fabric Covered Magnetic Board”

  1. Elise says:

    That is SO cute! I love your instructions: makes me want to hot glue something! Beautiful fabric combination! Lovely!

  2. High-Heeled Foot in the door says:

    I love this! Great job. I make something similar with a corkboard and then a use push pins on it and hang all my jewelry on it!

  3. Monica says:

    This is so cute! It makes me want to cover my Ikea magnetic board with fabric and ribbon. Thanks for sharing.

  4. G+D says:

    Great project! Saving this for future reference. Thanks for sharing!

  5. Anna Lindsey Sailer O'Reilly says:

    Love it! I also have made a couple of covered tack/jewelry boards!
    http://annaoreilly.blogspot.com/2009/02/easy-diy-jewelry-board.html
    http://annaoreilly.blogspot.com/2008/12/tims-home-office.html

    I hope you enjoy CG!

    Anna

  6. Tracy Rauch says:

    Came across your board googling how to do this exact project. Thought of it and just needed to see someone else do it… so thanks!

  7. […] fabric covered magnetic board turns an ordinary white office magnetic board into a stylish organizational […]

  8. […] pair of memo boards I made last year out of recycled cabinet doors for my office, and this other fabric covered magnetic board I created for a […]

Leave a Reply